For the binding of heavy goods, the commonly used binding rope has fiber rope, steel wire rope and chain, and it is used together with the elastic screw and shackle. Attention should be paid to:
1. Lashing and tightness should be appropriate. Ask to bind fastening, do not make it loose, but also to prevent too tight break. At the same time, it should be easy to untie, so that it can be loosened immediately in case of accident.
2. Improve the binding effect and save the binding rope. For this purpose, the binding Angle should be as small as possible, and the force of each cable should be balanced.
3. Guarantee that the goods will not be damaged. For goods that are afraid of moisture, in addition to the reasonable selection of cargo location, before binding should be covered with tarpaulin, easy to corroded parts should be coated to protect grease.
4. Binding process should be correct. Tie rope should be left and right, front and rear symmetry. Each tie rope should be wound around the cargo one time and then fixed on both sides. No more than three cords must be attached to each root, and not in the same direction. For wheeled goods such as vehicles, sleepers should be used to pave the way for laying rails, and triangular iron should be used to fix between wheels and rails, and triangular iron should be welded on the rails. In addition to fastening the heavy goods in the hold, they should be supported vertically and horizontally with square wood and nailed between the goods with wood to prevent them from shifting on the way.